Step 1: Cleanse the skin, and allow it to dry completely.

Step 2: Personal Microderm treatment. Remember to watch the instructional video and carefully follow all directions.

Step 3: Apply a toner.

Step 4: We recommend applying our Recovery mask to soothe and hydrate.

Step 5: Apply a moisturizer and SPF daily.

The Personal Microderm is a once a week microdermabrasion treatment that exfoliates and removes the top layer of dead skin. Cleansing brushes like the PMD Clean are used to cleanse the skin on a daily basis. Both are great and perform very different functions. If you like using a daily cleansing brush, then you will love Personal Microderm. A scrub may exfoliate but does not use vacuum suction. Some scrubs claim or include microdermabrasion in the name or marketing. However, true microdermabrasion uses vacuum suction. When using a scrub you also run the risk of spreading bacteria on the skin. The Personal Microderm uses discs embedded with Aluminum Oxide crystals which are antibacterial.

Each patented disc is hand dipped in Aluminum Oxide crystals. Aluminum Oxide is the same material that is used for microdermabrasion in many doctor’s offices. It is completely safe, antibacterial, and non-toxic. Aluminum Oxide does not cause adverse skin reactions and is not carcinogenic. Aluminum Oxide crystals are ideal for microdermabrasion and are the most popular choice of professionals.

(I.e. move from the white disc to the grey discs, from the blue disc to the green discs, or from the green to the red?) Everyone’s skin is different. Some sensitive skin types may never need to increase their exfoliation level by moving to a different disc color; others with more coarse skin will need to change to a higher disc level to see more significant results. Ultimately, the disc color used depends on your treatment goals. If you want a more intense treatment, and if your skin has adjusted to the Personal Microderm, try a more intense disc. However, we recommend everyone begins their first treatment by using the white training disc. If your skin responds well, that is a good indication that you can move on to the grey disc the following week. Each week you can move to the next level based on your skin’s reaction and how intense you’d like your treatment to be. Always remember to gradually and carefully increase the intensity with the disc colors; if you are too intense with your exfoliation, you may create red marks or scabbing. This may happen if you do not follow the instructions (by stalling, pressing into the skin, passing over the same area more than once, or using the wrong disc).

Each disc will last 3-4 uses. Most treatments will take three to five minutes. The size of the area being treated and the length of each treatment will ultimately determine how long a disc can be used.

Rinse the cap and filter between each use with warm water and soap. Be sure to replace the disc every 3-4 uses, and replace the filter every 3-4 months. Wipe down the body of the device as needed, and store your Personal Microderm in a dry place.

No. Do not treat the area where your skin starts to become thinner and more delicate. Typically users can follow the outside of the orbital bone as a guide.

Like a blow dryer, the Personal Microderm Classic, Pro, Plus, and Man must be plugged in to operate. The power cord included with each device is not a charger, and the device will not turn on unless it is connected to power. This is to ensure a steady stream of energy to the device for performance.

No. The Personal Microderm tool is just designed to exfoliate your skin, the tool will not remove hair.

No pressure is necessary, instead, just lightly glide the tool over your skin and allow the vacuum to do the work. Watch our video here for more information.

When too much pressure is applied, the Personal Microderm may exfoliate beyond the dead skin layer. This may result in redness or light scabbing. The vacuum suction of Personal Microderm is calibrated perfectly to remove the dead, dull layer of skin. Do not apply pressure.

No. The Personal Microderm should only be used once a week. Microdermabrasion removes the top layer of dead, dull skin, and your body needs one week to rejuvenate. Be patient and use the device consistently to see results.

Yes, continue with your daily skincare regime and SPF. For best results, we recommend using our Daily Cell Regeneration System (cleanser, toner, and moisturizer) both morning and night.

Here are some common trouble-shooting guides:

1. Double check to ensure the cap is tight. Screw cap on as tightly as possible creating a tight seal between the black rubber O-ring and the cap.

2. Make sure your filter is clean, and wash the filter after each use.

3. Check the black rubber O-ring. This black rubber ring is replaceable. You can remove it and rinse it with mild soap and water. This ring is vital in creating a tight seal with the cap, which ensures good vacuum suction.

4. Tighten the cap as TIGHT as possible. If the cap is not tight enough, the seal will be broken and there won’t be any suction

Not everyone will see dead skin residue, as shown on our demo videos, after using the Personal Microderm. This does not mean that the Personal Microderm is not working. The amount of residue you see following your treatment is based on your skin type and the climate you live in; more oily skin types and those living in humid climates may not see any dead skin residue. The Personal Microderm is still working.

Some users have found that if the device is held too long in one spot or the skin is extra sensitive it has caused dermabrasion, a treatment performed by specialists where deeper layers of skin are removed. It is possible that you have areas of dermabrasion. To help these areas to heal and regenerate properly, we would suggest the following:

1. Cleanse the skin to avoid infection

2. Keep the area moist to promote healing

3. Avoid sun exposure and, after skin has healed, use sunscreen every day. New skin is more susceptible to sun damage.

4. Your skin should heal normally in 5 to 7 days. When your skin has healed and regenerated, and you are comfortable in doing another treatment, you should be able to continue on.

Anyone using chemical peels or products containing acids including hydroxy acids, malic acid, lactic acid and or retinoids, should be cautious in their use of the Personal Microderm. Allow at least 48 hours between the use of these active ingredients, and a Personal Microderm treatment. Depending on skin type, these products may make the skin too sensitive for any Personal Microderm use. If you are concerned that your skin falls into this category, discontinue use of these products for at least seven days. Consult your doctor or dermatologist if you are unsure that the Personal Microderm is suitable for your skin.

PMDBeauty.com offers a 30-day satisfaction guarantee and a one-year warranty on the Personal Microderm. If you Subscribe & Save to skincare or replacement discs your Personal Microderm is covered as long as you are enrolled in Subscribe & Save. See more https://pmdbeauty.com/return-information/ You can also purchase a limited lifetime warranty.

Pull the disc straight up to avoid changing the angle of the post it rests on. If you are unable to remove the disc with your hands alone, use a set of pliers and pull the disc straight up. No twisting or back and forth motion is necessary.