GET A FRESH FACE DAILY WITH
PMD Clean is a smart facial cleansing device. With over 7,000 vibrations per minute, our SonicGlow technology not only ensures a deep cleanse, but provides a way to lift, firm, and tone problem areas for a more youthful appearance.
$99.00 – $179.00
HOW OUR TECHNOLOGY
WORKS FOR YOU
Breaks down dirt and oil from within the pores at 7,000 vibrations per minute while operating at a perfect frequency to lift, firm, and tone the skin.
The Beauty of Silicone
Using ultra-hygienic silicone, PMD Clean is odor-resistant, antibacterial, hypoallergenic, and waterproof. Our hassle-free brush head never needs replacing.
Customizable for All Skin Types
A powerful cleansing device with bristles gentle enough for all skin types. With four customizable modes, PMD Clean provides a full spectrum of cleansing options.
ActiveWarmth™ Facial Massage
ActiveWarmth™ technology featured on the PMD Clean Pro uses heat therapy combined with SonicGlow™ to activate your skincare by assisting with deeper absorption and effectiveness.
Through elements such as magnesium, iron, and oxygen, the gemstone found on the PMD Clean Pro RQ aids in reducing inflammation and tension.
GET THE BEST
RINSE & APPLY CLEANSER
Rinse face with warm water and gently rub in cleanser.
WET & POWER ON DEVICE
Rinse PMD Clean under water and power on device. We recommend modes 1 and 2 for optimum cleansing results.
Move brush head in circular motions, cleansing entire face. It is safe to spend more time in areas that may be of personal concern.
RINSE & PAT DRY
Rinse face and PMD Clean of any excess cleanser then pat dry.
MASSAGE IN SERUMS
Apply skincare products and use back side of the PMD Clean on mode 3 or 4 to gently massage. By powering on ActiveWarmth™ on the PMD Clean Pro, serums will be more effective and absorb deeper into the skin.
LIFT, FIRM, & TONE
We recommend using mode 3 or 4 for massaging. By operating at a perfect frequency, the PMD Clean lifts, firms and tones the skin. Through the pulsations of the device, blood flow is stimulated and collagen production is increased.
ONE DEVICE, TWO SIDES
FOUR INDIVIDUAL MODES
THE BEST FEATURES FOR
YOUR UNIQUE SKIN
PMD Clean was designed with you in mind! Its silicone brush and four customizable modes can be optimized for all skin types.
Powered by a AA battery
Stands with base(included)
Silicone facial massager
ActiveWarmth™ facial massager
ActiveWarmth™ rose quartz stone massager
FREQUENTLY ASKED QUESTIONS (FAQ's)
How long does the PMD Clean battery last?
If you use the device once a day, the battery should last up to two months.
What if my PMD Clean loses power?
Chances are the battery is dead. In the PMD Clean unscrew the metal cap below, remove battery, replace, and screw the metal cap tight. For the PMD Clean Pro, insert charging cable into the bottom of the device, plug USB cord in, and charge for 2-3 hours.
How long does the PMD Clean Pro battery last?
How do I charge my PMD Clean Pro?
Insert the long, thin end of the charging cord into the device. The charing port is in the center of the base of the device. The charging port has a tight seal to ensure it is waterproof, therefore this may require stronger push than anticipated. Plug the opposite end of the charging cord into your outlet adapter, computer, or any other USB charging port available. The light behind power button will illuminate to indicate that your device is charging. This light will turn off once the device is fully charged.
Can I use this in the shower?
Absolutely! Consequently, the PMD Clean is waterproof and safe to use anywhere.
How long should I use the massager?
We suggest using the massager for one minute per area daily.
Can I use my own soap?
Yes! Furthermore, the PMD Clean works with all liquid cleansers.
What side of the PMD Clean is meant for cleansing and what side is meant for massaging in products?
The side with the bristles is used for cleansing. Therefore, the other side with the firm grooves is the massager.
Does the brush head need to be replaced?
Our silicone brush is odor-resistant, antibacterial, hypoallergenic, and waterproof. The brush head is hassle-free and therefore, never needs replacing.
How do I clean my device?
First, wash with soap and warm water. Second, pat dry with a clean towel. Let it air dry. Additionally, you should also periodically remove the cap and wipe down any debris that may collect inside.